 |
INSTRUCTIONS FOR
HT-338, HT-218, and LY-600A:
1) First thread the tail into the head of
the cable tie.
2) Adjust the wheel to the required tension
for the cable tie.
3) Place the tail and shaft of the cable tie
into the solt at the tip of the gun barrel.
4) Push the tie as far back onto the gun base
as possible. The head must be touching
the gun tip outside the tool.
5) Squeeze the handle of the gun to pull the
tie through the head making sure the
head of the tie is always touching the tip
of the gun.
6) Keep pulling the handle until the tie is
securely fastened around the desired object.
7) The gun will automatically cut the excess
tie off when it reaches maximum tension. |
|
